Anyang Tianren Metallurgical & Refractories Co.,Ltd
Silicon Manganese 6014
Silicon Manganese 6014Silicon manganese 6014 The raw materials for the production of silicon manganese6014 alloy are manganese ore, manganese slag, silica, coke, dolomite (or limestone), fluorite.The production of mg-si alloy can use one kind of manganese ore or several kinds of manganese ore (including manganese...

Silicon manganese 6014

The raw materials for the production of silicon manganese6014 alloy are manganese ore, manganese slag, silica, coke, dolomite (or limestone), fluorite.The production of mg-si alloy can use one kind of manganese ore or several kinds of manganese ore (including manganese rich slag) mixed ore.Because manganese silicon alloy requires low content of iron and phosphorus than high carbon ferromanganese, it is required that the manganese ore of smelting manganese silicon alloy has higher ratio of ferromanganese and manganese phosphorus.The higher the manganese content, the better the indexes.

Silicon manganese alloys are produced by the simultaneous reduction of manganese ore (including manganese slag) and manganese oxide and silicon dioxide in silica by carbon in the mine heat furnace.The production of mg-si alloy is carried out in the mineral hot furnace, using carbon reducing agent, manganese ore, manganese rich slag, sintered manganese ore, calcined manganese ore and silica as raw materials, lime, dolomite, fluorite and so on as flux in the electric furnace continuous production.

When manganese or silicon was deoxygenated separately under the same conditions, the burning loss rate was 46% and 37%, while the burning loss rate of silicon-manganese alloy was 29%.As a result, it has been widely used in steel training, its output growth rate is higher than the average growth rate of ferro-alloy, and higher than the growth rate of steel, which has become an indispensable composite deoxidizer and alloy additive in the steel industry.Carbon is 1.Less than 9% of the mg-si alloy is also used in the production of low carbon ferromanganese and electrosilicon-thermal metal manganese semi-finished products.In ferro-alloy production enterprises, the silicon-manganese alloy used in steel-smelting is usually referred to as commercial silicon-manganese alloy, the silicon-manganese alloy used for smelting low carbon iron is called self-use silicon-manganese alloy, and the silicon-manganese alloy used in smelting metal is called high-silicon-manganese alloy.MnSiO3, MnSiO and MnSiO3 are formed by the combination of manganese and silicon.It can be seen from the state diagram of silicon-manganese that the most stable silicate is MnSi.Due to the negative value of free energy generated by the silicification of manganese, it is far greater than the negative value of free energy produced by the carbide of manganese.


1. Minimum order quantity

10tons

 

2. Quality

commodity inspection

 

3. Packing

1ton/bag or 40*25KG in a 1ton bag

 

4. Shipping

Tianjin port

Qingdao port

Shanghai port

 

5. About price

We will offer the best price.

 

6. Our advantage

Firstly we are manufacturer, you could get best price without paying any commission. Secondly,our products have been selling well in the Chinese market for 5 years and have been well received by our customers.In the Asian market also by Korea, Japan, Thailand and Vietnam and other countries customers praise!

 

7.Delivery time

Normally 10-15days after advanced payment was received.we will arrange the fastest shipping date for you.

 


Related Products
Hot Tags: silicon manganese 6014, China, manufacturers, suppliers, factory, low price, quotation, free sample